High Speed Automatic Slitting and Rewinding Machine Roll to Roll Thermal Paper Slitting Machine

1.Paper cutting machine to the entire volume or the entire printing material for the cut of a fixed length, such as supermarket labels, must use fixed-length slitting control

 2.Slitting length can be set continuously, if it’s error of the actual slitting length, it’s easy to calibrate by the way of set the parameters. 

3.The slitting control of paper slitting machine is in 2 modes:static slitting and dynamic slitting. 

- Static slitting: Accurately stop when the set length arrives, and then static cutting, and restart operation after cutting. 

- Dynamic slitting: without stopping but send slitting signal when the set length arrives, and then dynamic cutting directly on the process of material movement

- Unwinding unit adopt photoelectric web guide system, with high precision. Control mode in two steps: manual and automatic

- Rewinding way: center coiling

- The tension control of unwinding unit and rewinding unit is adopt automatic tension control system; the control modes are tension feedback control and taper control.

- The machine keep round cutter and flat cutter two tools, with reliable quality, easy to adjust.

- The slitter has fixed length automatic stop and the length meter automatically functions.

- The Slitter has trimming device, the edge material discharged by the fan.

- The machine is applicable for the slitting operation for the varies of thin coils of narrow band (insulating materials, mica tape, film, etc.) 

Factory Workshop